DD4hep plugin


Describe new markup and construction for DD4hep plugin and building layerless geometry.

The DD4hepPlugin allows building of a Acts::TrackingGeometry from DD4hep input. DD4hep uses ROOT TGeo as the underlying geometry model.


Previous versions of ACTS (prior to v20.0.0) used a different integration mechanism. Please refer to the documentation of prior versions for more information.


The basic input for building the detector are a detector description in the XML file format and a corresponding detector constructor written in C++. These two components have to be changed accordingly. Detector constructors use these XML files as an input and construct a detector in the DD4hep geometry format. The whole detector is segmented into different detector parts, e.g. barrels and endcaps which describe different sub-detectors. Since these sub-detectors are built differently, they need different detector constructors. In this way one detector description in XML can use various detector constructors, needed for the different kinds of detector parts.

In the detector description model of DD4hep any detector is a tree of instances of the so-called DetElement class. This DetElement class provides all needed detector information, e.g. readout segmentation, geometrical information, environmental conditions. This tree is parallel to the volume tree, which provides the TGeoVolumes and their placements. The relation between these two trees is one-directional, i.e. every volume can be accessed via its corresponding DetElement, but not vice versa. Not every supporting material will be declared as a detector element, hence, the geometrical tree can have a deeper hierarchy structure. In order to access both, detector specific and geometrical information, the conversion to the tracking geometry navigates through the detector tree. The DetElement can also be extended, to add specific features or to access information. This extension mechanism is used during the translation process.

The ACTS DD4hep plugin inspects the geometry hierarchy and searches for sensitive detector elements and passive material structures. ACTS identifies relevant parts of the detector by DD4hep’s DetType (see documentation), which can be set from XML. ACTS will attempt to translate detector elements marked as DetType::TRACKER. DetType::BARREL and DetType::ENDCAP tell ACTS to convert a detector element as a sensitive volume, while the beampipe is identified by DetType::BEAMPIPE.

In addition, ACTS looks for specific markup that can be attached to detector elements via XML or from the experiment specific geometry driver / factory.

ACTS specific markup

In cases where ACTS requires information that is not accessible or derivable from DD4hep data, it will look for additional parameters that mark up detector elements. One such example is the layer pattern. ACTS looks for detector elements which represent subdetectors, identified by DetType::BARREL and ENDCAP. To group sensors into layers correctly, it will search for the detector element corresponding to a layer by name. Which detector element names are interpreted as layers is steered by the layer_pattern parameter. It contains a regex that is evaluated against every detector element name encountered. It can be set from the XML using DD4hep’s plugin mechanism and the provided ParametersPlugin like:

<detector id="ODD_PixelEndcapN_ID" name="PixelEndcapN" 
          type="ODDPixelEndcap" readout="PixelEndcapReadout" vis="invisible">
  <type_flags type="DetType_TRACKER + DetType_ENDCAP"/>
  <!-- ... -->
<!-- ... -->
  <plugin name="DD4hep_ParametersPlugin">
    <argument value="PixelEndcapN"/>
    <argument value="layer_pattern: str=PixelEndcapN\d|PixelEndplate"/>

In this snippet, ParametersPlugin assigns a value of layer_pattern: str=PixelEndcapN\d|PixelEndplate to the detector of name PixelEndcapN. ACTS uses this parameter to resolve the layer detector elements.


In ACTS the surfaces describing the sensitive modules of a detector are directly linked to these of the initial geometry input. In the case of DD4hep the Acts::DD4hepDetectorElement was introduced which is the direct link of ACTS to DD4hep. In the case for tracking relevant parameters in the DD4hep geometry description are changed (e.g. alignment) it will be automatically changed in ACTS.


The DD4hepPlugin is only build on demand. The DD4hepPlugin depends on the TGeoPlugin therefore both plugins need to be installed. During the cmake configuration the flags ACTS_BUILD_PLUGIN_DD4HEP=on and ACTS_BUILD_PLUGIN_TGEO=on need to be set. In addition, ROOT and DD4hep installations need to be available to cmake.


To guarantee a working translation from DD4hep input to ACTS geometry the following conditions need to be met:

  • The detector needs to have a barrel-endcap structure: Every hierarchy of subdetectors (e.g. PixelDetector, StripDetector,…) needs to be decomposed into

    1. {barrel}

    2. {barrel + 2 endcaps}

    3. {2 endcaps} - in case there is no barrel at this stage (e.g. forward end caps)

    These subdetectors need to be flagged using the correct DetType.

  • If a hierarchy is not only a single barrel but is decomposed of a barrel and its corresponding endcaps they need to be grouped together in an assembly using the DD4hep_SubdetectorAssembly constructor which is provided by DD4hep. Example of usage in xml file (where Barrel0, nEndCap0 and pEndCap0 are sub detectors defined in the file PixelTracker.xml):

    <include ref="PixelTracker.xml"/>
      <detector id="1" name="PixelTracker" type="DD4hep_SubdetectorAssembly"
        <shape name="PixelEnvelope" type="Tube" rmin="Env0_rmin"
               rmax="Env0_rmax"dz="Env0_dz" material="Air"/>
        <composite name="Barrel0"/>
        <composite name="nEndCap0"/>
        <composite name="pEndCap0"/>

    If a user wants to create his/her own constructor to group these volumes together the type needs to be set to “compound”.

  • Since the translation walks through the DetElement tree the following objects need to be declared as a DD4hep DetElement:

    • The subvolumes e.g. barrel, endcap, beampipe (they are usually built with different DD4hep constructors and are therefore DD4hep DetElement’s per default).

    • Layers when containing sensitive material and/or the layer should carry material (which will be mapped on the layer if indicated), or the layer is sensitive itself.


      The layer does not need to be a direct child of the volume (barrel or endcap), it an be nested in substructures

    • Sensitive detector modules


      The sensitive detector modules need to be placed in a layer however it can be nested in substructures (can be a component of a modules) i.e. it does not need to be a direct child of the layer

  • The tracking geometry needs to be built from bottom to top to ensure navigation. Therefore, the different hierarchies need to be sorted ascending. Per default the sub detectors are sorted by the id of their DetElement. In case another sorting needs to be applied, the users can provide their own function.

There are two modes building the layers around the sensitive detector modules:

  • The DetElement containing the sensitive modules have a geometrical shape. The boundaries of the layers in ACTS are taken directly from the given shape.

  • The DetElement containing the sensitive modules have no specific shape (assembly). The boundaries of the layers are calculated automatically by adding a tolerance to the geometric extension of the contained surfaces. The tolerances in r and z need to be set for every DetElement representing layer using DD4hep parameters envelope_r_min, envelope_r_max, envelope_z_min, envelope_z_max. attached to the layer detector element. (see Possible parameters ACTS will interpret)


    Either all or none of the envelope_* parameters need to be set.

The volumes are automatically built around the layers. Volume boundaries for the volumes are calculated automatically by adding a tolerance to the geometric extension of the contained layers. The tolerance parameters layerEnvelopeR and layerEnvelopeZ need to be set in the Acts::convertDD4hepDetector() function.

Furthermore, parameters can be handed over for material mapping or the axes orientation of modules.

Summing up the DetElement tree in DD4hep should have the following structure:

Detector element structure

It is also possible to translate a very simple detector geometry, which just consists of cylindrical (for a barrel) or disc (for endcaps) layers which either have material, or, are declared sensitive in DD4hep themselves without containing any detector modules.

Possible parameters ACTS will interpret

ACTS geometry translation uses parameters attached to DD4hep detector elements via the VariantParameters extension. You can set this extension from your factory code, or use DD4hep’s plugin mechanism to set parameters on detector elements via name. Here’s an excerpt from the Open Data Detector on how to use this to mark a passive structure as a passive layer:

    <detector id="ODD_Solenoid_ID" name="Solenoid" type="ODDCylinder" beampipe="false" vis="Aluminum">
      <type_flags type="DetType_TRACKER" />
      <boundary_material surface="inner" binning="binPhi,binZ" bins0="mat_sol_bPhi" bins1="mat_sol_bZ"/>
      <tubs name="Solenoid" rmin="sol_rmin" rmax="sol_rmax" dz="sol_hlength" material="Aluminum">
        <layer_material surface="representing" binning="binPhi,binZ" bins0="mat_sol_bPhi" bins1="mat_sol_bZ"/>

    <plugin name="DD4hep_ParametersPlugin">
      <argument value="Solenoid"/>
      <argument value="passive_layer: bool = true"/>
  • Layer

    • envelope_{r,z}_{min,max}: explicit envelope for a layer

    • layer_material: mark a layer as passive (use this if you want to add a passive layer that is not a beampipe)

    • Surface binning:

      • surface_binning: set to true to indicate that explicit surface binning is set.

      • surface_binning_n_{phi,r}: surface binning for a layer

    • Layer material:

      • layer_material: set to true to indicate that the layer has layer material configuration

        • layer_material_representing: set to true to indicate representing layer material

        • layer_material_inner: set to true to indicate inner layer material

        • layer_material_outer: set to true to indicate outer layer material

        • layer_material_{representing,inner,outer}_bin{X,Y,Z,R,Phi,RPhi,H,Eta,Mag} to give the number of bins in a direction

  • Sensor

  • Volume / subdetector

    • boundary_material: set to true to indicate boundary material is set

    • boundary_material_{negative,positive,inner,outer} to indicate which boundary material surfaces should be set

    • boundary_material_{negative,positive,inner,outer}_bin{X,Y,Z,R,Phi,RPhi,H,Eta,Mag} to give the number of bins in a direction


To receive the Acts::TrackingGeometry the global function Acts::convertDD4hepDetector() should be used, where the DD4hep world DetElement needs to be handed over. For a valid translation, that all prerequisites described above are met and that the right VariantParameters are added during the DD4hep construction.

DD4hep field adapter

The DD4hep plugins ships with an adapter class that connects a DD4hep-defined field to the Acts::MagneticFieldProvider interface:

class DD4hepFieldAdapter : public Acts::MagneticFieldProvider

Public Functions

DD4hepFieldAdapter(dd4hep::OverlayedField field)
virtual Result<Vector3> getField(const Vector3 &position, MagneticFieldProvider::Cache &cache) const override

Retrieve magnetic field value at a given location.

Requires a cache object created through makeCache().

  • position[in] global 3D position for the lookup

  • cache[inout] Field provider specific cache object


magnetic field vector at given position

virtual Result<Vector3> getFieldGradient(const Vector3 &position, ActsMatrix<3, 3> &derivative, MagneticFieldProvider::Cache &cache) const override

Retrieve magnetic field value its its gradient.

Requires a cache object created through makeCache().

  • position[in] global 3D position

  • derivative[out] gradient of magnetic field vector as (3x3) matrix

  • cache[inout] Field provider specific cache object


magnetic field vector

virtual MagneticFieldProvider::Cache makeCache(const Acts::MagneticFieldContext &mctx) const override

Make an opaque cache for the magnetic field.

Instructs the specific implementation to generate a Cache instance for magnetic field lookup.


mctx – The magnetic field context to generate cache for


Cache The opaque cache object