This file is foreseen for the
Geometrymodule to replace
Physical constants in native units.
Unit constants are intentionally not listed.
All physical quantities have both a numerical value and a unit. For the computations we always choose a particular unit for a given physical quantity so we only need to consider the numerical values as such. The chosen base unit for a particular physical dimension, e.g. length, time, or energy, within this code base is called the native unit. The base units should be chosen such that they are internally consistent, require the least amount of explicit conversion factors (ideally none at all), and have typical numerical values close to unity to reduce numerical issues.
Here, the following native units are used:
Length is expressed in mm.
Time is expressed in [speed-of-light * time] == mm. A consequence of this choice is that the speed-of-light expressed in native units is 1.
Angles are expressed in radian.
Energy, mass, and momentum are all expressed in GeV (consistent with speed-of-light == 1).
Electric charge is expressed in e, i.e. units of the elementary charge.
The magnetic field is expressed in GeV/(e*mm). The magnetic field connects momentum to length, e.g. in SI units the radius of a charged particle trajectory in a constant magnetic field is given by\[radius = - (momentum / charge) / field\]
With the chosen magnetic field unit the expression above stays the same and no additional conversion factors are necessary.
Amount of substance is expressed in mol.
Depending on the context a physical quantity might not be given in the native units. In this case we need to convert to the native unit first before the value can be used. The necessary conversion factors are defined in
Acts::UnitConstants. Multiplying a value with the unit constant produces the equivalent value in the native unit, e.g.
double length = 1 * Acts::UnitConstants::m; // length == 1000.0 double momentum = 100 * Acts::UnitConstants::MeV; // momentum == 0.1
The conversion of a value in native units into the equivalent value in a specific other unit is computed by dividing with the relevant unit, e.g.
double length = 10.0; // native units mm double lengthInM = length / Acts::UnitConstants::m; // == 0.01;
To further simplify the usage, physical quantities can also be expressed via C++ user literals defined in
Acts::UnitLiterals. This allows us to express quantities in a concise way:
using namespace Acts::UnitLiterals; double length = 1_m; // == 1000.0 double momentum = 1.25_TeV; // == 1250.0 double lengthInUm = length / 1_um; // == 1000000.0 double momentumInMeV = momentum / 1_MeV; // == 1250000.0
To ensure consistent computations and results the following guidelines must be followed when handling physical quantities with units:
All unqualified numerical values, i.e. without a unit, are assumed to be expressed in the relevant native unit, e.g. mm for lengths or GeV for energy/momentum.
If a variable stores a physical quantity in a specific unit that is not the native unit, clearly mark this in the variable, i.e.
double momentum = 100.0; // momentum is stored as native unit GeV double momentumInMeV = 10.0; // would be 0.01 in native units
All input values must be given as
numerical_value * unit_constantor equivalently using the unit literals as
value_unit. The resulting unqualified numerical value will be automatically converted to the native unit.
To output an unqualified numerical value in the native units as a numerical value in a specific unit divide by the unit constants as
numerical_value / unit_constantor using the unit literals as
value / 1_unit.
#include <Acts/include/Definitions/Units.hpp> using namespace Acts::UnitLiterals; // define input values w/ units (via unit constants) double width = 12 * Acts::UnitConstants::mm; double mmuon = 105.7 * Acts::UnitConstants::MeV; // define input values w/ units (via unit user literals) double length = 23_cm; double time = 1214.2_ns; double angle = 123_degree; double momentum = 2.5_TeV; double mass = 511_keV; double velocity = 345_m / 1_s; double bfield = 3.9_T; // convert output values (via unit constants) double t_in_ns = trackPars.time() / Acts::UnitConstants::ns; // convert output values (via unit user literals) double x_in_mm = trackPars.position()[ePos0] / 1_mm; double p_in_TeV = trackPars.absoluteMomentum() / 1_TeV;
A helper script is available in
Core/scripts/print_units_physical_constants.pyto validate some of the numerical values.
Since using user-defined literals requires a namespace import of
Acts::UnitLiteralsit should not be used in headers since it would (accidentally) modify the namespace wherever the header is included.
constexpr double degree = 0.017453292519943295
constexpr double e = 1.0
Charge, native unit e (elementary charge)
constexpr double g = 1.0 / 1.782662e-24
constexpr double GeV = 1.0
constexpr double kg = 1.0 / 1.782662e-27
constexpr double mm = 1.0
constexpr double mol = 1.0
Amount of substance, native unit mol.
constexpr double mrad = 1e-3
constexpr double rad = 1.0
constexpr double s = 299792458000.0
Depends on speed of light in SI units
constexpr double T = 0.000299792458
Magnetic field, native unit (eV*s)/(e*m²)
Depends on speed of light in SI units
constexpr double u = 0.93149410242
atomic mass unit u
- namespace PhysicalConstants